Grandstream Networks Grandstream BudgeTone 200 User Manual download pdf (Page 36)

Allow DHCP

Option 42 to

override NTP

server

DHCP Option 42 specifies a list of IP addresses for Network Time Protocol

(NTP) servers available to the client. If you choose yes, BT200 will use the

NTP servers resolved from DHCP, instead of the one you specified in the

"NTP Server" option above.

Distinctive

Ring Tone

Customer Ring Tone 1 to 3 with associate Caller ID: when selected, if Caller

ID is configured, then the device will ONLY sound this ring tone when the

incoming call is from the Caller ID, device will use System Ring Tone for all

other calls.

When selected but no Caller ID is configured, the selected ring tone will be

used for all incoming calls.

Disable Call

Waiting

Default is No.

Quick IP Call

Mode

This model has the ability to dial an IP address under the same LAN segment

by simply pressing the last octet in the IP address.

In the Advanced Settings page there is an option "Use Quick IP-call mode",

by default it is set to No. When this option is set to YES, and #XXX is

dialed, where X is 0-9 and XXX <=255, phone will make direct IP call to

aaa.bbb.ccc.XXX where aaa.bbb.ccc comes from the local IP address

REGARDLESS of subnet mask.

#XX or #X are also valid so leading 0 is not required (but OK).

eg.

192.168.0.2 calling 192.168.0.3 just dial #3 follow by SEND or #

192.168.0.2 calling 192.168.0.23 just dial #23 follow by SEND or #

192.168.0.2 calling 192.168.0.123 just dial #123 follow by SEND or #

192.168.0.2 dial #3 and #03 and #003 has same effect --> call 192.168.0.3

Note:- If you have a SIP Server configured, Direct IP-IP call will still work.

However, if you are using STUN, Direct IP-IP call will also use STUN.

Lock keypad

update

If this parameter is set to “Yes”, the configuration updates via keypad for

Menu Item 7, 9, 12 are disabled.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 53 54

No comments

Grandstream Networks Grandstream BudgeTone 200 User Manual Page 36