Grandstream Networks GXW40XX User Manual download pdf (Page 15)

Grandstream Networks, Inc. GXW40XX User Manual Page 15 of 38

Firmware 1.0.4.2 Last Updated: 06/2011

FXS Port #1: SIP UserID and Authenticate ID entered, Hunting group set to "Active"

FXS Port #2: SIP UserID and Authenticate ID left blank, Hunting Group set to "1"

FXS Port #3: SIP UserID and Authenticate ID left blank, Hunting Group set to "1"

FXS Port #4: SIP UserID and Authenticate ID entered, Hunting group set to "Active"

FXS Port #5: SIP UserID and Authenticate ID left blank, Hunting Group set to "4"

FXS Port #6: SIP UserID and Authenticate ID left blank, Hunting Group set to "4"

FXS Port #7: SIP UserID and Authenticate ID entered, Hunting group set to "Active"

FXS Port #8: SIP UserID and Authenticate ID left blank, Hunting Group set to "7"

…

FXS Port #24: SIP UserID and Authenticate ID left blank, Hunting Group set to "2"

Hunting Group 1 contains ports 1, 2, 3. Hunting Group 4 contains ports 4, 5, 6.

Hunting Group 7 contains ports 7, 8.

Please be aware, the choice of 1 for ports 2 and 3, the choice of 4 for ports 5 and 6, the choice 7 for port

8 is required to indicate that the SIP account tied to port market as “Active” will be used for all members

of the same Hunting group. Needless to say, those members of the same Hunting group may not be

sequential ports. In following example ports 3, 5 and 7 tied to SIP Account configured in Port #1 marked

as “Active”, and ports 4,6,8 tied to SIP Account configured in Port #2 marked as “Active” as well.

Example of not sequential configuration of a multiple Hunting Group:

FXS Port #1: SIP UserID and Authenticate ID entered, Hunting group set to "Active"

FXS Port #2: SIP UserID and Authenticate ID entered, Hunting Group set to "Active"

FXS Port #3: SIP UserID and Authenticate ID left blank, Hunting Group set to "1"

FXS Port #4: SIP UserID and Authenticate ID left blank, Hunting group set to "2"

FXS Port #5: SIP UserID and Authenticate ID left blank, Hunting Group set to "1"

FXS Port #6: SIP UserID and Authenticate ID left blank, Hunting Group set to "2"

FXS Port #7: SIP UserID and Authenticate ID left blank, Hunting group set to "1"

FXS Port #8: SIP UserID and Authenticate ID left blank, Hunting Group set to "2"

…

FXS Port #24: SIP UserID and Authenticate ID left blank, Hunting Group set to "2"

Note: A single call directed to the SIP account will NOT result in all ports ringing at the same time. They

will ring in the hunting group only. This feature is applicable to incoming calls only.

INTER-PORT CALLING

In some cases a user may want to make phone calls between the phones connected to multiple ports of

the same gateway when it is used as a stand alone unit, without the use of a SIP server. This feature will

also be applicable when the gateway is used with Hunting Groups and is registered to SIP server only

with one master number. In such cases users still will be able to make inter-port calls by using the IVR

feature.

For example on the GX4004 and GXW4008 the user connected to port 1 can reach the user connected to

port 3 by dialing *** and 73. Digit 7 indicated using inter-port calling feature, digit 3 indicates the port

number which should be reached. At the same manner the user connected to port 4 can reach the user

connected to port 8 by dialing *** and 78.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 37 38

No comments

Grandstream Networks GXW40XX User Manual Page 15