Grandstream Networks, Inc. GXW40XX User Manual Page 33 of 38
Firmware 1.0.4.2 Last Updated: 06/2011
Default is
No. When set to “Yes” a SUBSCRIBE for Message Waiting Indication will be
sent periodically.
If this parameter is set to “Yes”, the “From” header along with Privacy and
P_
Asserted_Identity headers in outgoing INVITE message will be set to anonymous,
blocking Caller ID.
Default is No. If set to Yes, incoming calls with anonymous Caller ID will be rejected with
486 Busy message.
Default is
Standard. Choose the selection to meet some special requirements from
Softswitch vendors. Example of vendors - CBCOM, RNK.
Grandstream implemented SIP Session Timer. The session timer extension enables SIP
sessions to be periodically “refreshed” via a SIP request (UPDATE, or re-INVITE. When
the session interval expires, if there is no refresh via a UPDATE or re-INVITE message,
the session will be terminated.
Session Expiration is the time (in seconds) at which the session is considered timed out,
if no successful session refresh transaction occurs beforehand. The default value is 180
The minimum session expiration (in seconds). The default value is 90 seconds.
If selecting “Yes” the phone will use session timer when it makes outbound calls if
remote party supports session timer.
If selecting “Yes” the phone will use session timer when it receives inbound calls with
session timer request.
If selecting “Yes” the phone will use session timer even if the remote party does not
support this feature. Selecting “No” will allow the phone to enable session timer only
when the remote party support this feature.
To turn off Session Timer, select “No” for Caller Request Timer, Callee Request Timer,
As a Caller, select UAC to use the phone as the refresher, or UAS to use the Callee or
proxy server as the refresher.
As a Callee, select UAC to use caller or proxy server as the refresher, or UAS to use the
phone as the refresher.
Session Timer can be refreshed using INVITE method or UPDATE method. Select “Yes”
to use INVITE method to refresh the session timer.
Default is No, If set to “Yes”, device will send an INVITE with audio vocoders upon
completition of Fax to continue session in audio only.
Vocoder in 200OK
Default is No. If set to “Yes”, device will include only the first match vocoder in its 200OK
response, otherwise it will include all match vocoders in same order received in INVITE.
The GXW40XX supports up to 5 different Vocoder types including G.711 A-/U-law,
G.726 (Supports bit rates 16, 24, 32 and 40), G.723.1, G.729A/B/E and iLBC. The user
can configure Vocoders in a preference list that will be included with the same
preference order in SDP message. The first Vocoder is entered by choosing the
appr
opriate option in “Choice 1”. The last Vocoder is entered by choosing the
appropriate option in “Choice 8”.
Defines the encoding rate for G.723 vocoder. By default, 6.3kbps rate is chosen.
Sets the iLBC frame size in 20ms or 30ms
Comments to this Manuals