Grandstream Networks GXW40XX User Manual download pdf (Page 17)

Grandstream Networks, Inc. GXW40XX User Manual Page 17 of 38

Firmware 1.0.4.2 Last Updated: 06/2011

CALL FEATURES

GXW40XX supports the traditional telephony features available in a PBX as well as additional advanced

telephony features.

ABLE 6: CALL FEATURES TABLE (STAR CODE)

Key Call Features

*02 Forcing a Codec (per call)

*027110 (PCMU), *027111 (PCMA), *02723 (G723), *02729

(G729), *0272616 (G726-r16), *0272624 (G724-r24), *0272632 (G726-r32), *0272640 (G726-

r40), *027201 (iLBC)

*03 Disable LEC (pe call) Dial “*03” + ” number ”. No dial tone is played in the middle.

*16 Enable SRTP

*17 Disable SRTP

*30 Block CallerID (for all-config change)

*31 Send CallerID (for all-config change)

*67 Block CallerID (per call)

*82 Send CallerID (per call)

*47

Direct IP Calling. Dial “*47” + “IP address”. No dial tone will be played in the middle. Detail see

Direct IP Calling section on page 12.

*50 Disable Call Waiting (for all-config change)

*51 Enable Call Waiting (for all-config change)

*69 Call Return Service: Dial *69 a

nd the phone will dial the last incoming phone number

received.

*70 Disable Call Waiting (Per Call)

*71 Enable Call Waiting (Per Call)

*72 Unconditional Call Forward: Dial “*72” and then the forwarding number followed by “#”. Wait

for dial tone and hang up. (dial tone indicates successful forward)

*73 Cancel Unconditional Call Forward: Dial “*73” and wait for dial tone, then hang up.

*74 Enable Paging Call:

Dial “*74” and then the destination phone number you want to activate in

Paging mode.

*78 Enable Do Not Disturb (DND): When enabled all incoming calls will be rejected.

*79 Disable Do Not Disturb (DND): When disabled, incoming calls will be accepted.

*87 Blind Transfer

*90 Busy Call Forward: Dial “*90” and then the forwarding number followed by “#”. Wait for dial

tone then hang up.

*91 Cancel Busy Call Forward: dial “*91”. Wait for dial tone. Hang up.

*92 Delayed Call Forward: Dial “*92” and then the forwarding number followed by “#”. Wait for

dial tone then hang up.

*93 Cancel Delayed Call Forward: Dial “*93” for a dial tone, then hang up.

Flash/Hook

If user hears call waiting beep, flash/hook will switch to the new incoming call. Also used to

switch to a new channel for a new call.

Pressing pound sign will serve as Re-Dial key.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 37 38

Comments to this Manuals

No comments

Grandstream Networks GXW40XX User Manual Page 17

Comments to this Manuals

Related products and manuals for Gateways/controllers Grandstream Networks GXW40XX