Grandstream Networks GXW410X User Manual download pdf (Page 19)

DTMF Payload

Type

This parameter sets the payload type for DTMF using RFC2833. Default is 101.

Syslog Server

The IP address or URL of System log server. This feature is especially useful for ITSP (Internet

Telephone Service Provider)

Syslog Level

Select the ATA to report the log level. Default is NONE. The level is one of DEBUG, INFO,

WARNING or ERROR. Syslog messages are sent based on the following events:

1. product model/version on boot up (INFO level)

2. NAT related info (INFO level)

3. sent or received SIP message (DEBUG level)

4. SIP message summary (INFO level)

5. inbound and outbound calls (INFO level)

6. registration status change (INFO level)

7. negotiated codec (INFO level)

8. Ethernet link up (INFO level)

9. SLIC chip exception (WARNING and ERROR levels)

10. memory exception (ERROR level)

The Syslog uses USER facility. In addition to standard Syslog payload, it contains the following

components: GS_LOG: [device MAC address][error code] error message

Example: May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000] Ethernet link is up

NTP server

URI or IP address of the NTP (Network Time Protocol) server, which will be used by the phone to

synchronize the date and time.

Allow DHCP

Option 42 to

override an NTP

server

Default value is No. If set to Yes, the NTP server will originate from the DHCP server.

Enable Video

Surveillance

When set to Yes, GXW410x will start converting video feed received from analog camera to IP

packets. In order to view this video feed, please follow instructions given under Video Surveillance

chapter on page 23.

RTSP Port

By default it is 554.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

No comments

Grandstream Networks GXW410X User Manual Page 19