Grandstream Networks GXW410X User Manual download pdf (Page 7)

FIGURE 2: DIAGRAM OF GXW410X DISPLAY PANEL

TABLE 2: DEFINITIONS OF THE GXW DISPLAY PANEL

Power LED

Indicates Power. Remains ON when Power is connected and unit is turned ON.

Ready LED

Remains ON after boot-up.

LAN LED

Indicates LAN (or WAN) port activity

PC LED

Indicates PC (or LAN) port activity

Video LED

Remains solid green on boot-up. If Video IN terminal is connected, indicates

video activity.

LEDs 1 - 8

Indicate status of the respective FXO Ports on the back panel

Busy - ON

Available - OFF

NOTE: All LEDs display green when ON. The Ready light will only be ON when the network interface is

ready and the Web User Interface is accessible.

During a firmware upgrade or configuration download the following LED pattern will be observed:

Power, Ready, Video and WAN LEDs will be ON. The FXO port LED will keep flashing during download

and then stay OFF while the new files are written. The entire process may take between 20 to 30

minutes. The firmware upgrade is complete when you can login into the web configuration pages.

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

No comments

Grandstream Networks GXW410X User Manual Page 7