Grandstream Networks Grandstream GXV-3000 User Manual download pdf (Page 13)

Grandstream Networks, Inc. GXV-3000 User Manual Page 11 of 46

Firmware 1.0.1.7 Updated: 06/2007

SIP ACCOUNTS AND USING THE PHONE

MULTIPLE SIP ACCOUNTS AND LINES

The GXV-3000 can support up to 3 independent SIP accounts. Each account is capable of independent

SIP server, user and NAT settings. Each of the 3 line buttons (LINE1-LINE3) is “virtually” mapped to an

individual SIP account. In off-hook state, select an idle line and the name of the account (as configured in

the web interface) is displayed on the LCD and a dial tone is heard. Or, press the selected line continu-

ously until the related SIP profile showed up on the LCD.

For example: Configure the three SIP accounts as “FreeWorldDialup”, “BroadSoft” and “Asterisk PBX”

respectively and ensure each is active and registered. When LINE1 is pressed, you will hear a dial tone

and see “FreeWorldDialup” on the LCD display; when LINE2 is pressed, you will hear a dial tone and see

“BroadSoft” on the LCD display; when LINE3 is pressed, you will hear a dial tone and see “Asterisk PBX”

on the LCD display.

To make a call, select the line you wish to use. The LED will light up solid red. If you continue to press

one LINE, it will circulate among the registered accounts.

For example: when LINE1 is pressed, the LCD displays “FreeWorldDialup”; If LINE1 is pressed twice, the

LCD displays “BroadSoft” and the subsequent call will be made through SIP account 2 - BroadSoft.

Incoming calls to a specific account will attempt to use its corresponding LINE if it is not in use. When

the “virtually” mapped line is in use, the GXV-3000 will flash the next available LINE (from left to right) in

red. A line is ACTIVE when it is in use and the corresponding LED is solid red.

ANDSET, SPEAKERPHONE AND HEADSET MODE

Handset can be toggled between Speaker/Headset. To switch between Handset and Speaker/Headset,

press the Hook Flash in the handset cradle or press the SPEAKER button.

COMPLETING CALLS

There are four ways to complete a call:

1. D

IAL: Take Handset/SPEAKER/Headset off-hook or press an available LINE key (activates

speakerphone). The line will have a dial tone and the primary line (LINE1) LED is red. If you

wish, select another LINE key (alternative SIP account). Enter the phone number and press the

SEND key.

2. REDIAL: Take Handset/SPEAKER/Headset off-hook or press an available LINE key (activates

speakerphone), the corresponding LED will be red. Press the SEND button to

redial the last num-

ber called.

3. U

SE THE MENU: Press the OK button to bring up the Main Menu. Select Phone Book and select

phone number. Press OK to select and press OK again to dial. The call will dial out in speaker-

mode

with related SIP profile.

4. P

AGING/INTERCOM: This is only valid if the SERVER/PBX supports this feature and both the phone

and PBX (e.g. Asterisk) are correctly programmed. Take the Handset/SPEAKER/Headset off-

hook, select the LINE key associated with account, press OK key to display LCD: LINEx: PAGE

USING. Dial the phone number you want to Page/Intercom and then press SEND key.

NOTE:

• Dial-tone and dialed number display occurs after the handset is off-hook and the line key is se-

lected.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 45 46

Comments to this Manuals

No comments

Grandstream Networks Grandstream GXV-3000 User Manual Page 13

Comments to this Manuals

Related products and manuals for IP phones Grandstream Networks Grandstream GXV-3000