Grandstream Networks Grandstream GXV-3000 User Manual download pdf (Page 27)

Grandstream Networks, Inc. GXV-3000 User Manual Page 25 of 46

Firmware 1.0.1.7 Updated: 06/2007

INDIVIDUAL ACCOUNT SETTINGS

The GXV-3000 has 3 line appearances, each with an independent SIP account. Each SIP account re-

quires its own configuration page. Their configurations are identical.

ABLE 11: SIP ACCOUNT CONFIGURATION PAGE DEFINITIONS

Account Active

This field indicates whether the account is active. The default value for the primary account

(Account 1) is Yes. The default value for the other two accounts is No.

Account Name

The name associated with each account - displayed on LCD.

SIP Server

SIP Server’s IP address or Domain name provided by VoIP service provider.

Outbound Proxy

IP address or Domain name of Outbound Proxy, Media Gateway, or Session Border Con-

troller. Used by GXV-3000 for firewall or NAT penetration in different network environment.

If the system detects symmetric NAT, STUN will not work. ONLY OBP or session border

controller can provide solution for symmetric NAT.

SIP User ID

User account information provided by VoIP service provider (ITSP). It is either an actual

phone number or is formatted like one.

Authenticate ID

SIP service subscriber’s Authenticate ID used for authentication. It can be identical to or

different from SIP User ID.

Authenticate Password

SIP service subscriber’s account password for GXV-3000 to register to (SIP) servers of

ITSP.

Name

SIP service subscriber’s name that is used for Caller ID display.

Use DNS SRV: Default is No. If set to “Yes”, the client will use DNS SRV to look up server.

User ID is Phone Number

If the GXV-3000 has an assigned PSTN telephone number, this field should be set to

“Yes”. Otherwise, set it to “No”. If “Yes” is set, a “user=phone” parameter will be attached

to the “From” header in SIP request to indicate the E.164 number

SIP Registration

This parameter controls whether the GXV-3000 needs to send REGISTER messages to

the proxy server. The default setting is “Yes”.

Unregister on Reboot Default is No. If set to “Yes”, the SIP user’s registration information will be cleared on re-

boot and “*” will be in SIP Contact header to notify the server.

This parameter allows user to specify the time frequency (in minutes) that GXV-3000 re-

freshes its registration with the specified registrar. The default interval is 60 minutes. The

maximum interval is 65,535 minutes (about 45 days).

Local SIP port

This parameter defines the local SIP port used to listen and transmit. The default value for

Account 1 is 5060. It is 5062, 5064 for Account 2 and Account 3.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 45 46

Comments to this Manuals

No comments

Grandstream Networks Grandstream GXV-3000 User Manual Page 27

Comments to this Manuals

Related products and manuals for IP phones Grandstream Networks Grandstream GXV-3000