Grandstream Networks, Inc. GXW40XX User Manual Page 9 of 38
Firmware 1.0.4.2 Last Updated: 06/2011
G.726 provides proprietary
VAD, CNG, and signal
power estimation, Voice
Play Out unit (reordering,
fixed
and adaptive jitter
buffer, clock
synchronization), AGC
(automatic gain control),
controlling via voice packet
header
power estimation, Voice
Play Out unit (reordering,
fixed and adaptive jitter
buffer, clock
synchronization), AGC
(automatic gain control),
controlling via voice packet
header
G.726 provides proprietary
VAD, CNG, and signal
power estimation, Voice
Play Out unit (reordering,
fixed
and adaptive jitter
buffer, clock
synchronization), AGC
(automatic gain control),
controlling via voice packet
header
DHCP Server/Client
Switched Mode
Switched Mode
Yes, DHCP Client only
Fax over IP
Fax Relay up to 14.4kpbs
and auto-
for Fax Pass-through,
Fax Datapump V.17, V.19,
V.27ter, V.29 for T.38 fax
relay
T.38 compliant Group 3 Fax
auto-switch to G.711 for Fax
Pass-through,
Fax Datapump V.17, V.19,
V.27ter, V.29 for T.38 fax
relay
Fax Relay up to 14.4kpbs
and auto-switch to G.711
for Fax Pass-through,
Fax Datapump V.17, V.19,
V.27ter, V.29 for T.38 fax
relay
QoS
Diffserv
VLAN tagging
Diffserv
VLAN tagging
Diffserv
VLAN tagging
Transport Protocol
RTP/RTCP RTP/RTCP RTP/RTCP
DTMF Method
In-audio, RFC2833, and/or
SIP Info
In-
SIP Info
In-Audio, RFC2833, and/or
SIP Info
IP Signaling
SIP (RFC 3261) SIP (RFC 3261) SIP (RFC 3261)
Provisioning
TFTP, HTTP, HTTPS TFTP, HTTP, HTTPS TFTP, HTTP, HTTPS
Control
TLS/SIPS TLS/SIPS TLS/SIPS
Management
Syslog support, HTTP and
Telnet access
Syslog support, HTTP and
Telnet access
Syslog support, HTTP and
Telnet access
Dial Plan
Yes Yes Yes
UPnP Support
Yes Yes N/A
Caller ID
Bellcore Type 1 & 2, ETSI,
BT, NTT, and DTMF-based
CID
Bellcore Type 1 & 2, ETSI,
BT, NTT, and DTMF-based
CID
Bellcore Type 1 & 2, ETSI,
BT, NTT, and DTMF-based
CID
Wink
Yes Yes Yes
EMC
FCC part15 Class B
FCC part15 Class B
FCC part15 Class B
Comments to this Manuals