Grandstream Networks GXW410X User Manual download pdf (Page 26)

TABLE 12: CHANNELS PAGE DEFINITIONS

Dial Plan

The Dial Plan feature implemented is applicable for VOIP to PSTN calls only. You may

configure a dial plan based on the following grammar:

1. Accept Digits: 1,2,3,4,5,6,7,8,9,0,*,#,A,a,B,b,C,c,D,d

2. Grammar:

x - any digit from 0-9;

xx+ - at least 2 digit number;

xx. - at least 2 digit number;

^ - exclude;

[3-5] - any digit of 3, 4, or 5;

[147] - any digit 1, 4, or 7;

<2=011> - replace digit 2 with 011 when dialing

WARNING - illegal input will fall back to default

Example 1: {[369]11 | 1617xxxxxxx} - Allow 311, 611, 911, and any 10 digit

numbers of leading digits 1617.

Example 2: {^1900x+ | <=1617>xxxxxxx} - Block any number of leading digits 1900

and add prefix 1617 for any dialed 7 digit numbers.

Example 3: {1xxx[2-9]xxxxxx | <2=011>x+} - Allow any length of number with

leading digit 2 and 10 digit-numbers of leading digit 1 and leading exchange number

between 2 and 9;

If leading digit is 2, replace leading digit 2 with 011 before dialing

Default: PSTN Outgoing - {x+}

Note: If you do not plan to use this feature set to default {x+}

Hook flash Duration

(X10ms)

Default 600ms. This value can accept any value in the 100-2000ms range.

Use DTMF Parameter

from RFC2833 or SIP Info

Default Yes, No means to use DTMF parameter settings according to DTMF Digit

Length, DTMF Digit Volume and DTMF Dial Pause.

DTMF Digit Length

Default value is 100ms. Please not that the value will be multiplied by 10ms

DTMF Digit Volume

Default value is -11dB.

DTMF Dial Pause

Default value is 100ms. Please note that the value will be multiplied by 10ms.

PROFILES

Profiles are basically IP-PBX / SIP Server configuration templates. If you have more than one IP-PBX

system or SIP Server that you would like to use with the GXW410x, then you can configure Profile 2 or 3.

Note: Make sure you select the correct profile for each channel under Channels PAGE

TABLE 13: PROFILE PAGE DEFINITIONS

Activate Profile

When set to Yes the SIP Profile is activated.

Profile Name

A name to identify a Profile.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Comments to this Manuals

No comments

Grandstream Networks GXW410X User Manual Page 26

Comments to this Manuals

Related products and manuals for Gateways/controllers Grandstream Networks GXW410X