Grandstream Networks BudgeTone-200 User Manual download pdf (Page 10)

Grandstream Networks, Inc. BT200 User Manual Page 10 of 33

Firmware 1.1.5.15 Last Updated: 01/2008

Using the GXP SIP Enterprise Phone

ETTING FAMILIAR WITH THE LCD

BT200 phone has a numeric LCD of 64mmx24mm size with backlight. This model has a small red LED

status reminder. Here is the display when all segments illuminate:

Figure 5: BT200 LCD

When the phone is in the normal idle state, the backlight is off. Whenever an event (call) occurs, the

backlight will turn on automatically to bring the user’s attention. In addition, if Voice Mail configured and

there is a VM waiting, the red LED will be blinking to remind user there is a Voice Mail in the Voice Mail

server.

Table 5: LCD Icons

Icon LCD Icon Definitions

Connectivity Status / SIP Proxy/Server Icon:

OFF – IP address of Sip server is not found

ON – IP address of Sip server are located

Blinking –Ethernet link failure or the phone is not registered properly

Phone Status Icon:

OFF when the handset is on-hook

ON when the handset is off-hook

Speaker Phone Status Icon:

FLASH when phone rings

OFF when the speakerphone is off

ON when the speakerphone is on

Handset and Speakerphone/Headset Volume Icons:

0-7 scales to adjust handset / speakerphone volume

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 32 33

No comments

Grandstream Networks BudgeTone-200 User Manual Page 10