Grandstream Networks BudgeTone-200 User Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 33
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
Grandstream Networks, Inc. BT200 User Manual Page 19 of 33
Firmware 1.1.5.15 Last Updated: 01/2008
Configuration Guide
The BT200 can be configured in two ways. Firstly, using the Key Pad Configuration Menu on the phone;
secondly, through embedded web-configuration menu.
CONFIGURATION VIA KEYPAD
The BT200 keypad is the same as a traditional phone, with additional feature functionality including
speaker, menu keys, LCD navigation keys, and advanced feature keys which include hold, transfer,
conference and flash.
1. Be sure the phone is idle.
2. Press the MENU button to enter the keypad MENU to configure the phone.
Using the Keypad
1. To enter the MENU, press MENU button.
2. Navigate the menu by using the UP/DOWN
3. Press the MENU button to confirm a menu selection.
4. To delete an entry by pressing the MUTE/DEL button.
Press the MENU button to enter the key the Key Pad Menu. The menu options available are listed in table 8.
Table 8: Key Pad Configuration Menu
Manual Option Call Features
1 Display “[1] dhcP Onor [1] dhcP oFF” for the current selection
Press MENU key to enter edit mode
2 Display “[2] IP Addr
Press MENU to display the current IP address
Enter new IP address if DHCP is OFF
3 Display “[3] SubNet
Press MENU to display the Subnet mask
Enter new Subnet mask if DHCP is OFF
4 Display “[4] routEr
Press MENU to display the Router/Gateway address
Enter new Router/Gateway address if DHCP is OFF
5 Display “[5] dnS
Press MENU to display the DNS address
Enter new DNS address if DHCP is OFF
6 Display “[6] tFtP
Press MENU to display the TFTP address
Enter new TFTP server IP address
7 Display “[7] G-711u 2
Press MENU to select new codec
Press ‘’ or ’’ to browse a list of available codecs
8 Display “[8] codE rEL
Press Menu to display the code releases
Press ‘’ or ’’ to browse
9 Display “[9] Phy Addr
Press MENU to display the physical / MAC address.
10 Display “[10] ring 0
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 32 33

Comments to this Manuals

No comments