Grandstream Networks BudgeTone-200 User Manual download pdf (Page 30)

Grandstream Networks, Inc. BT200 User Manual Page 30 of 33

Firmware 1.1.5.15 Last Updated: 01/2008

Auto Answer

Default is No. If set to “Yes”, BT200 will automatically switch on speaker to

answer the incoming call. Set to Intercom/Paging mode, it will answer the call

based on the SIP info header from the server.

Allow Auto Answer by

Call-Info

If the Call-Info header contains answer-after=0, the call be answered

automatically (so called paging mode).

Turn off speaker on

remote disconnect

When BYE is received, the phone will turn off its speaker automatically.

Check SIP User ID for

incoming INVITE

Check the SIP User ID in Request URI. If they don’t match, the call will be

rejected.

Refer-To Use Target

Contact

Default is NO. If set to YES, then for Attended Transfer, the “Refer-To” header

uses the transferred target’s Contact header information.

Disable Multiple Media

Attribute in SDP

Default is No.

Preferred Vocoder

BT200 supports up to 5 different Vocoder types including G.711(a/µ) (also known

as PCMU/PCMA), GSM, G.723.1, G.729A/B.

Configure Vocoders in a preference list that is included with the same preference

order in SDP message. Enter the first Vocoder in this list by choosing the

appropriate option in “Choice 1”. Similarly, enter the last Vocoder in this list by

choosing the appropriate option in “Choice 8”.

SRTP Mode

Enable SRTP mode based on selection. Default is No.

Special Feature

Default is Standard. Choose the selection to meet special requirements from Soft

Switch vendors.

SAVING THE CONFIGURATION CHANGES

After the user makes a change to the configuration, press the “Update” button in the Configuration Menu.

The web browser will then display a message window to confirm saved changes.

Grandstream recommends reboot or power cycle the IP phone after saving changes.

REBOOTING THE PHONE REMOTELY

Press the “Reboot” button at the bottom of the configuration menu to reboot the phone remotely. The web

browser will then display a message window to confirm that reboot is underway. Wait 30 seconds to log in

again.

1 2 ... 25 26 27 28 29 30 31 32 33

Comments to this Manuals

No comments

Grandstream Networks BudgeTone-200 User Manual Page 30

Comments to this Manuals

Related products and manuals for IP phones Grandstream Networks BudgeTone-200