Grandstream Networks GXW410X User Manual download pdf (Page 18)

STUN Server

IP address or Domain name of the STUN (Simple Traversal of UDP through NATs) server.

Firmware

Upgrade &

Provisioning

This radio button will enable GXW410x to download firmware or configuration file through either

TFTP or HTTP.

Via TFTP Server

If selected, the GXW410x will attempt to retrieve new configuration file or new code image from the

specified TFTP server at boot time. It will make up to 5 attempts before timeout and then it will start

the boot process using the existing code image in the Flash memory. If a TFTP server is

configured and a new code image is retrieved, the new downloaded image will be verified and then

saved into the Flash memory.

Note: Please do NOT interrupt the TFTP upgrade process (especially the power supply) as this will

damage the device. Depending on the network environment this process can take up to 25 or 30

minutes.

Via HTTP Server

The URL for the HTTP server used for firmware upgrade and configuration via HTTP.

For example, http://provisioning.mycompany.com:6688/Grandstream/

Here “:6688” is the specific TCP port that the HTTP server is listening at, it can be omitted if using

default port 80.

Note: If Auto Upgrade is set to No, GXW410x will only do HTTP download once at boot up.

Firmware Server

Path

IP address or domain name of firmware server.

Config Server

Path

IP address or domain name of configuration server.

Firmware File

Prefix

Default is blank. If configured, GXW400X will request firmware file with the prefix. This setting is

useful for ITSPs. End-user should keep it blank.

Firmware File

Postfix

Default is blank. End-user should keep it blank.

Config File

Prefix

Default is blank. End-user should keep it blank.

Config File

Postfix

Default is blank. End-user should keep it blank.

Allow DHCP

Option 66 to

override server

Default value is No. If set to Yes, configuration file will originate from the DHCP server.

Automatic

Upgrade

Choose Yes to enable automatic upgrade and provisioning. In “Check for new firmware every”

field, enter the number of minutes to enable GXW410x to check the server for firmware upgrade or

configuration. When set to No, GXW410x will only do upgrade once at boot up. Other options are:

“ Always check for New Firmware.”

“ Check New Firmware only when F/W pre/suffix changes”

“ Always skip the Firmware check”

Authenticate

Conf File

If set to Yes, configuration file is authenticated before acceptance. This protects the configuration

from an unauthorized change.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Comments to this Manuals

No comments

Grandstream Networks GXW410X User Manual Page 18

Comments to this Manuals

Related products and manuals for Gateways/controllers Grandstream Networks GXW410X