Grandstream Networks BudgeTone-200 User Manual download pdf (Page 23)

Grandstream Networks, Inc. BT200 User Manual Page 23 of 33

Firmware 1.1.5.15 Last Updated: 01/2008

Daylight Savings Time

This parameter controls time displayed in daylight savings time. If set to “Yes”, then the

displayed time will be 1 hour ahead of normal time.

The “Optional Rule” is configured to automatically adjust the Daylight Savings Time (DST)

based on the rule set in this field.

Rule Syntax:

• start-time; end-time; saving

• Both start-time and end-time have the same syntax: month,day,weekday,hour,minute

o month: 1,2,3,..,12 (for Jan, Feb, .., Dec)

o day: [+|-]1,2,3,..,31

o weekday: 1, 2, 3, .., 7 (for Mon, Tue, .., Sun), or 0 which means the daylight

saving rule is not based on week days but based on the day of the month.

o hour: hour (0-23), minute: minute (0-59)

If “weekday” is 0, it means the date to start or end daylight saving is at exactly the given date.

In that case, the “day” value must not be negative. If “weekday” is not zero and “day” is

positive, then the daylight saving starts on the first “day” the iteration of the weekday (e.g.:

1st Sunday, 3rd Tuesday etc). If “weekday” is not zero and “day” is negative, then the

daylight saving starts on the last “day” the iteration of the weekday (e.g.: last Sunday, 3rd last

Tuesday etc).

The saving is in the unit of minutes. The saving time may also be preceded by a negative (-)

sign if subtraction is desired instead of addition.

The default value is set for US, the “Automatic Daylight Saving Time Rule” shall be set to

“3,2,7,2,0;11,1,7,2,0;60”

Examples

US/Canada where daylight saving time is applicable:

03,02,7,02,00;11,1,7,02,00;60

This means the daylight saving time starts from the second Sunday of March at 2AM and

ends the first Sunday of November at 2AM. The saving is 60 minutes.

Date Display Format

Choose one of the following formats:

• Year-Month-Day

• Month-Day-Year

• Day-Month-Year

Display Account Name

instead of Date

Choose to display Account Name or date on LCD.

Mute Speaker Ringer

in Headset Mode

Default is No. This field lets user to choose whether to ring the phone Speaker

when headset is connected.

Advanced User configuration includes not only the end user configuration, but also advanced

configuration such as SIP configuration, Codec selection, NAT Traversal Setting and other miscellaneous

configuration.

Table 11: Advanced Settings

Admin

Password

Administrator password. Only the administrator can access the “Advanced Settings” and

“Account Settings” page. Password field is purposely blank for security reasons after

clicking update and saved. The maximum password length is 25 characters.

G723 rate

Encoding rate for G723 codec. By default, 6.3kbps rate is set.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 32 33

Comments to this Manuals

No comments

Grandstream Networks BudgeTone-200 User Manual Page 23

Comments to this Manuals

Related products and manuals for IP phones Grandstream Networks BudgeTone-200