Grandstream Networks BudgeTone-200 User Manual download pdf (Page 33)

Grandstream Networks, Inc. BT200 User Manual Page 33 of 33

Firmware 1.1.5.15 Last Updated: 01/2008

Restore Factory Default Setting

WARNING: Restoring the Factory Default Setting will delete all configuration information of the phone.

Please backup or print all the settings before you restoring factory default settings. Grandstream is not

responsible for restoring lost parameters and cannot connect your device to your VoIP service provider.

INSTRUCTIONS FOR RESTORATION:

Step 1: Press the MENU button for Key Pad Menu options and press the Up button to see “reset”.

Step 2: Enter the MAC address printed on the bottom of the sticker. Please use the following

mapping:

0-9: 0-9

A: 22 (press the “2” key twice, “A” will show on the LCD)

B: 222

C: 2222

D: 33 (press the “3” key twice, “D” will show on the LCD)

E: 333

F: 3333

Example: if the MAC address is 000b

8200e395, it should be key in as “0002228200333395”.

NOTE: If there are digits like “22” in the MAC, you need to type “2” then press “->” right arrow key to

move the cursor or wait for 4 seconds to continue to key in another “2”.

Step 3: Press the MENU button again. If the MAC address is correct, the phone will reboot. Wait for

phone reboot and the LCD backlight finish flashing.

1 2 ... 28 29 30 31 32 33

No comments

Grandstream Networks BudgeTone-200 User Manual Page 33