Grandstream Networks Grandstream GXV-3000 User Manual download pdf (Page 22)

TABLE 9: STATUS CONFIGURATION PAGE DEFINITIONS

Hardware Revision

Hardware version number: Main Board, Interface Board

MAC Address

The device ID, in HEX format. This is a very important ID for ISP troubleshooting.

IP Address

This field shows IP address of GXV-3000

Product Model

This field contains the product model information.

Software Version

• Program: This is the main software (firmware) release number, always used for identify

the whole software (firmware) system of the phone.

• Loader: Driver loader code version number.

• Boot: Booting code version number

System Up Time

This field shows system up time since the last reboot.

Registered

This field indicates whether the accounts are registered to the related SIP server(s). GXV-3000

can support three different SIP profile.

PPPoE Link Up

This field shows whether the PPPoE connection is up if connected to DSL modem.

Detected NAT Type

This field shows what kind NAT router the GXV-3000 is connected to. It is based on the result

of STUN protocol resolution.

ADVANCED USER CONFIGURATION

The Advanced User configuration includes not only the end user configuration, but also advanced con-

figuration such as SIP configuration, Codec selection, NAT Traversal Setting and other miscellaneous

configuration.

The factory default password for Advanced User is “admin”. User may change the password. The pass-

word is case sensitive with a maximum length of 25 characters.

IGURE 7: SCREENSHOT OF ADVANCED USER CONFIGURATION PAGE

Grandstream Device Configuration

Password

Grandstream Networks, Inc. GXV-3000 User Manual Page 20 of 46

Firmware 1.0.1.7 Updated: 06/2007

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 45 46

No comments

Grandstream Networks Grandstream GXV-3000 User Manual Page 22